Parker 632 Hydraulic Tube Bender - Reconditioned

The Parker 632 provides accurate and consistent bends for various tubes, including copper, steel, and aluminum. 

Features:

• Hydraulically operated bender for bending annealed steel and stainless steel tubing from 3/8" O.D. through 2" O.D.
• Operated by means of a separate power source producing 10,000 psi hydraulic pressure
• Can be operated without bolting to a table or bench if no mandrels are required
• Excellent unit to move about and use at the point where the tubing installation is being made
• Can be attached to a table and used with mandrels
• Base unit only does not include pump or radius blocks or other accessories
• Can contact us for accessories and pump quote

Specifications:

• 1) Min. tube size 3/8”
• 2) Max. tube size 2”
• 3) Min. bend radius 1 1/8”
• 4) Max. bend radius 12” (special order)
• 5) Max. tube bend 180°
• 6) Weight — 170 lbs. (77.1 kg) without accessories
• 7) Minimum tube wall thickness (% of O.D.) 4% with mandrel, 7% without mandrel
• 8) The HB632 is capable of bending 1/2” O.D. and under fully annealed steel and stainless steel tubing with no limit on tube wall thickness
• 9) The HB632 is capable of bending SOFT aluminum and copper tubing with no limit on wall thickness.

Need this item repaired? Contact us at 800-800-6011

If we sell it, we rent it! Contact our rental team at 800-800-6011 or fill out this form.

. . Buyer shall have fifteen (15) days from the date of delivery to accept product