Greenlee 1801 Specifications:  Capacity: 1-1/4" and 1-1/2" IMC and Rigid 1-1/4" Rigid Conduit - 8-1/16" (204.8 mm) 1-1/2" Rigid Conduit - 9-11/16" (246.1 mm) Greenlee 1801 Features:•Ratchet action for increased...

Installed up through the bottom of the tray for easy removal after the cable is installed Individual rollers keep rolling with each cable even after several cables have     ...

  Outside DIA: 6" Pitch DIA: Between 3" and 6" Keyway: None Application: Cable Feeding 5 IN wide aluminum alloy sheave with self-Lubricating bearings Yoke frame slides into the end...

  Application: Cable Feeding 5 IN wide aluminum alloy sheave with self-Lubricating bearings Yoke frame slides into the end of conduit and holds sheave, allowing the cable being fed into...

For EMT Rigid IMC 881 Pipe Bender   4" Bender Shoe for Greenlee 881 Conduit Bender, two-shot. For EMT, IMC, and RIGID type conduit.

Description: The 555C Classic Series features simple relay controls for easy fieldrepairs, and compact handle design to prevent interference with conduitwhen bending. Features: Power Source: 120 VAC; 20 amp GFCI-protected...

      Greenlee 6001 Super Tugger Cable Puller / Wire Puller Power Unit  with force gauge and vise chains 6500 lbs  

Description: Strong, welded steel frames Forged steel closure-type hooks with 1 IN (25.4 mm) openings 5 IN (127 mm) wide aluminum alloy sheaves with self-lubricating bearings Features: Outside Diameter: 10.62"...

Description: Strong, welded steel frames Forged steel closure-type hooks with 1 IN (25.4 mm) opening. 5 IN (127 mm) wide aluminum alloy sheaves with self-lubricating bearings. Features: Outside Diameter: 18”...

Description: Strong, welded steel frames Forged steel closure-type hooks with 1 IN (25.4 mm) opening. 5 IN (127 mm) wide aluminum alloy sheaves with self-lubricating bearings Features: Outside Diameter: 24:...

        Description: Ratchet mechanism to easily raise or lower the height Roller bearings fit in the spindle groove to keep the spindle in place and turning freely...

 Helps roll and guide tray pulls. Steel frame easily attaches to cable tray up to 2" thick.  5" wide aluminum alloy sheaves with self-lubricating bearings 12" Tray-Type Sheave 12" x...