{"title":"Jacks","description":"","products":[{"product_id":"ellis-bridge-jack-model-bj-6-reconditioned-w-1-year-operational-warranty","title":"Ellis Bridge Jack Model BJ-6 Reconditioned","description":"\u003cp\u003eEllis Bridge Jack Model BJ-6 Reconditioned w\/ 1 Year Operational Warranty\u003c\/p\u003e\n\u003cp\u003eThe Ellis Bridge Jack \/ Modular Building Jack can support up to 80,000 pounds. It is the most rugged and durable screw jack Ellis offers.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cp\u003eWith top and bottom plates measuring 1\/2\" x 9\" x 9\" (BJ-3 BJ-6, BJ-12) for support, the Acme Screw is 2 and a 1\/2\" in diameter and greased for easy turning and capable of \u003cstrong\u003eextending a full 3\" (BJ-3), 6\" (BJ-6) or 12\" (BJ-12). \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor extra leverage, a\u003ca title='1\" Dia. Turning Rod' href=\"http:\/\/ellismanufacturing.com\/collections\/all\/products\/1-steel-adjustment-rods\"\u003e1\" STEEL ROD\u003c\/a\u003ecan also be used when turning the screw. The Ellis Bridge Jacks while \u003cstrong\u003eweighing 45 lbs. (BJ-3), 60lbs (BJ-6) and 70lbs (BJ-12)\u003c\/strong\u003e can \u003cstrong\u003esupport loads up to 80,000 lbs. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe top plate has been attached to swivel freely, allowing the screw to be turned with ease. For added support, gussets on the top and the bottom plate have been added with full length welds.  Also, 4 - 9\/16\"  holes (spaced 1-1\/2\" OC from each edge) have been added to the Base and Top Plates to make securing it easy.\u003c\/p\u003e\n\u003cp\u003eWe tested the Bridge Jacks to\u003cstrong\u003eover 200,000 lbs.\u003c\/strong\u003ebefore failure occurred! \u003c\/p\u003e\n\u003cp\u003eAlthough the Bridge Jacks were tested to over 200,000 lbs., we recommend applying a 2.5 to 1 safety factor when gauging the load capacity of these jacks.  Therefore,\u003cstrong\u003eDO NOT EXCEED 80,000 lbs\u003c\/strong\u003e. with any of the three Bridge Jacks.\u003c\/p\u003e\n\u003cp\u003eLifting Tests were also performed with the Bridge Jacks.  These tests were used to gauge the amount of weight one person could lift when a 1\" Dia.Steel Rod was placed in one of the 4 holes and used as a lever to assist in turning the screw.  With a 1\" dia. x 12\" long rod one man was able to lift 4,000 lbs.,  with a 1\" dia. x 24\" rod he lifted 8,000 lbs., and with a 1\" dia x 60\" rod he lifted 16,000 lbs. \u003c\/p\u003e\n\u003cp\u003ePlease note, lifting results are a direct result of ones own strength and leverage and will vary from person to person.  With this kind of hardware, it's no surprise that the Ellis Bridge Jack \/ Modular Building Jack can support loads up to 80,000 pounds.\u003c\/p\u003e\n\u003cp\u003eA favorite of contractors, they fit directly under concrete slabs or beams in tight spots, under homes or modular buildings as well as with timbers for shoring projects. Just install the Bridge Jack at its\u003cstrong\u003eclosed height of 10\" (BJ-3), 13\"\u003c\/strong\u003e\u003cstrong\u003e(BJ-6) or 19\" (BJ-12)\u003c\/strong\u003eand use the\u003cstrong\u003e3\" (BJ-3),\u003c\/strong\u003e \u003cstrong\u003e 6\" (BJ-6)\u003c\/strong\u003eor\u003cstrong\u003e12\" (BJ-12)\u003c\/strong\u003e of adjustment to screw it into position. \u003c\/p\u003e\n\u003cp\u003eSearch and Rescue teams also know the value of the Ellis Bridge Jack. With it's ability to fit in tight spaces to stabilize concrete slabs or steel beams, the Ellis Bridge Jack is a versatile tool for downed buildings and reinforcement in small areas. It is strength in a small package, when time is of the essence.\u003c\/p\u003e\n\u003cp\u003e**Do not extend screw past advertised adjustment range.  Do not exceed max safe load capacity.  Consult with engineer before use.\u003c\/p\u003e","brand":"ellis","offers":[{"title":"Default Title","offer_id":43209336914163,"sku":"Ellis BJ-6","price":350.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7597\/2675\/products\/bj-6.webp?v=1662745652"},{"product_id":"ellis-bridge-jack-bj-12-reconditioned-w-1-year-operational-warranty","title":"Ellis Bridge Jack BJ-12 Reconditioned","description":"\u003cp\u003eEllis Bridge Jack BJ-12 Reconditioned w\/1 Year Operational Warranty\u003c\/p\u003e\n\u003cp\u003eBJ-12\u003cbr\u003e\u003c\/p\u003e\n\n\u003cp\u003e19\" - 32\"\u003c\/p\u003e\n\n\n\u003cp\u003e80,000 Lbs.\u003c\/p\u003e\n\u003cp\u003eThe Ellis Bridge Jack \/ Modular Building Jack can support up to 80,000 pounds. It is the most rugged and durable jack Ellis offers. \u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cp\u003eWith top and bottom plates measuring 1\/2\" x 9\" x 9\" (BJ-3 BJ-6, BJ-12) for support, the Acme Screw is 2 and a 1\/2\" in diameter and greased for easy turning and capable of\u003cstrong\u003eextending a full 3\" (BJ-3), 6\" (BJ-6) or 12\" (BJ-12). \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor extra leverage, a\u003ca href=\"http:\/\/ellismanufacturing.com\/collections\/all\/products\/1-steel-adjustment-rods\" title='1\" Dia. Turning Rod'\u003e1\" STEEL ROD\u003c\/a\u003ecan also be used when turning the screw. The Ellis Bridge Jacks while\u003cstrong\u003eweighing 45 lbs. (BJ-3), 60lbs (BJ-6) and 70lbs (BJ-12)\u003c\/strong\u003e can \u003cstrong\u003esupport loads up to 80,000 lbs. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe top plate has been attached to swivel freely, allowing the screw to be turned with ease. For added support, gussets on the top and the bottom plate have been added with full length welds.  Also, 4 - 9\/16\"  holes (spaced 1-1\/2\" OC from each edge) have been added to the Base and Top Plates to make securing it easy.\u003c\/p\u003e\n\u003cp\u003eWe tested the Bridge Jacks to\u003cstrong\u003eover 200,000 lbs.\u003c\/strong\u003ebefore failure occurred! \u003c\/p\u003e\n\u003cp\u003eAlthough the Bridge Jacks were tested to over 200,000 lbs., we recommend applying a 2.5 to 1 safety factor when gauging the load capacity of these jacks.  Therefore,\u003cstrong\u003eDO NOT EXCEED 80,000 lbs\u003c\/strong\u003e. with any of the three Bridge Jacks.\u003c\/p\u003e\n\u003cp\u003eLifting Tests were also performed with the Bridge Jacks.  These tests were used to gauge the amount of weight one person could lift when a 1\" Dia.Steel Rod was placed in one of the 4 holes and used as a lever to assist in turning the screw.  With a 1\" dia. x 12\" long rod one man was able to lift 4,000 lbs.,  with a 1\" dia. x 24\" rod he lifted 8,000 lbs., and with a 1\" dia x 60\" rod he lifted 16,000 lbs. \u003c\/p\u003e\n\u003cp\u003ePlease note, lifting results are a direct result of ones own strength and leverage and will vary from person to person.  With this kind of hardware, it's no surprise that the Ellis Bridge Jack \/ Modular Building Jack can support loads up to 80,000 pounds.\u003c\/p\u003e\n\u003cp\u003eA favorite of contractors, they fit directly under concrete slabs or beams in tight spots, under homes or modular buildings as well as with timbers for shoring projects. Just install the Bridge Jack at its\u003cstrong\u003eclosed height of 10\" (BJ-3), 13\"\u003c\/strong\u003e\u003cstrong\u003e(BJ-6) or 19\" (BJ-12)\u003c\/strong\u003eand use the\u003cstrong\u003e3\" (BJ-3),\u003c\/strong\u003e \u003cstrong\u003e 6\" (BJ-6)\u003c\/strong\u003eor\u003cstrong\u003e12\" (BJ-12)\u003c\/strong\u003e of adjustment to screw it into position. \u003c\/p\u003e\n\u003cp\u003eSearch and Rescue teams also know the value of the Ellis Bridge Jack. With it's ability to fit in tight spaces to stabilize concrete slabs or steel beams, the Ellis Bridge Jack is a versatile tool for downed buildings and reinforcement in small areas. It is strength in a small package, when time is of the essence.\u003c\/p\u003e\n\u003cp\u003e**Do not extend screw past advertised adjustment range.  Do not exceed max safe load capacity.  Consult with engineer before use.\u003c\/p\u003e\n\n\n","brand":"Ellis","offers":[{"title":"Default Title","offer_id":43209382265075,"sku":"Ellis BJ-12","price":410.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7597\/2675\/products\/bj-12.webp?v=1662746261"},{"product_id":"m-6-rol-a-lift-1-pair-reconditioned","title":"Rol-A-Lift M6 Hydraulic Lift Pair - Reconditioned","description":"\u003ch2\u003eRol-A-Lift M6 Hydraulic Lift Pair\u003c\/h2\u003e\n\u003ch4\u003eReconditioned One Year Operational Warrannty\u003c\/h4\u003e\n\u003cp\u003e\u003cb\u003eRol-A-Lift \u003c\/b\u003eis the practical method of moving bulky and hard-to-handle loads, ideal for handling large, awkward objects or heavy equipment that is difficult to maneuver or position, like refrigerator cases, safes, or machines.\u003c\/p\u003e\n\u003cp\u003e Yet they are versatile enough to safely handle fragile, sensitive equipment, like glass crates, computers, electrical panels, and switchgear.\u003c\/p\u003e\n\u003ch2\u003eDESCRIPTION\u003c\/h2\u003e\n\n\n\n\n\n\n\n\n\n\n\n\u003ch5\u003eM-6 DIMENSIONS \u0026amp; SPECS (1 PAIR)\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCapacity Per Pair:\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\n\n\n\n\n\n\n\n\n\u003cp\u003e6,000 lbs\u003c\/p\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\u003cp\u003e\u003cstrong\u003eOverall Depth\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\u003cp\u003e16-3\/4″\u003c\/p\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\u003cp\u003e\u003cstrong\u003eMax. Hydraulic Lift\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\u003cp\u003e4-3\/4″\u003c\/p\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\u003cp\u003e\u003cstrong\u003eForks Adjustable\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\u003cp\u003e6″-19-1\/2″\u003c\/p\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\u003cp\u003e\u003cstrong\u003eType of Lift\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\u003cp\u003eHydraulic\u003c\/p\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\u003cp\u003e\u003cstrong\u003eFork Length\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\u003cp\u003e6″\u003c\/p\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\u003cp\u003e\u003cstrong\u003eStandard Wheels\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\u003cp\u003ePhenolic\u003c\/p\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\u003cp\u003e\u003cstrong\u003eFork Thickness\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\u003cp\u003e1-1\/8″\u003c\/p\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\u003cp\u003e\u003cstrong\u003eWheel Size\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\u003cp\u003e6″ x 2″\u003c\/p\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\u003cp\u003e\u003cstrong\u003eFork Width\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\u003cp\u003e3″\u003c\/p\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\u003cp\u003e\u003cstrong\u003eOverall Height\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\u003cp\u003e42-1\/2″\u003c\/p\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\u003cp\u003e\u003cstrong\u003eWeight Per Pair (Standard)\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\u003cp\u003e335 lbs\u003c\/p\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\u003cp\u003e\u003cstrong\u003eOverall Width\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\u003cp\u003e 23″\u003c\/p\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\u003cp\u003e\u003cstrong\u003eWeight Per Pair (Wide)\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\u003cp\u003e 425 lbs\u003c\/p\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\u003cp\u003e\u003cstrong\u003eCaster Centers\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\u003cp\u003e 18″\u003c\/p\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","brand":"Rol-A-Lift","offers":[{"title":"Default Title","offer_id":43753849127155,"sku":"Rol-A-Lift M6","price":1841.13,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7597\/2675\/files\/rol-a-lift-01.jpg?v=1715351933"}],"url":"https:\/\/www.gequip.com\/collections\/jacks.oembed","provider":"General Equipment \u0026 Supply","version":"1.0","type":"link"}